UNS Number N08330

Incoloy 330 is a steel alloy that is high in nickel and chromium. It provides good resistance to carburization, oxidation, and nitridation. RA 330 is also easily welded using all conventional processes; it can be formed hot (between 1750-1200° F) and cold.

Available Forms of Incoloy 330 at Rooplaxmi Steels:

•           Bar
•           Sheet
•           Plate
•           Pipe & Tube (welded and seamless)
•           Pipe Fittings
•           Wire

Characteristics of Incoloy 330:
•           Carburization resistant
•           Good nitridation resistance
•           Resists heat & oxidation
•           Corrosion resistant
•           Good strength

 

Incoloy 330 Chemical Composition, %:

Cr	Ni	C	Mn	P	S	Si	Mo
17.0-22.0	34.0-37.0	0.08 max	2.00 max	0.03 max	0.03 max	0.75-1.50	1.00-1.75

 

Cu	Ti	Fe	Sn	Pb
1.00 max	1.90-2.30	Balance	0.025	0.005 max

 

Application of Incoloy 330:

•           Industrial heating furnaces
•           Petrochemical furnace parts
•           Perlite systems and equipment
•           Boiler fixtures
•           Gas turbine components
•           Heat-treat furnace containers
•           High temperature fans
•           Salt pots

Machining and Fabrication with Incoloy 330:

Incoloy 330 is readily fabricated by standard commercial procedures. In comparison to carbon steel, stainless steels are tougher and tend to work harden rapidly. Alloy 330’s rate of work hardening is comparable to austenitic stainless steels.
Incoloy 330 can be welded using conventional welding processes.

Incoloy 330 ASTM Specification:

Pipe Smls	Pipe Welded	Tube Welded	Sheet / Plate	Bar
B535	B546, B710	B739	B536	B511, B512

 

Welding Wire Designations:
AWS A5.14 – ER330

 

Mechanical Properties of Incoloy 330:

At Room Temperature

Product form	Condition	Ultimate Tensile Strength (ksi)	0.2 % Yield (ksi)	Elongation (%)
Bar	Hot Finished and Annealed	80-90	35-45	38-45
Plate	Hot Rolled and Annealed	80-85	30-43	40-45
Sheet	Cold Rolled and Annealed	80-90	32-42	35-45